Ignition cable 16 kV, blue

Used mainly in automobile applications or for high fluctuations in the ambient air temperature up to + 180 °C, with inner braid for greater mechanical stability.

High-voltage ignition cable 15 kV and 20 kV, oxbrown-red
Used mainly in automobile applications or for high fluctuations in the ambient air temperature up to + 180 °C.

Cable for fluorescent tubes 4 kV and 7.5 kV, yellow
Used in fluorescent tube lighting systems for high fluctuations in the ambient air temperature up to + 180 °C. The installation must be protected, either in steel conduit or in flexible steel tubing of steel ribbon only, on or beneath plaster.

Characteristic features
•  In the event of fire, no fire support; retention of the insulation and low smoke emission.

Durability
•  The silicone compound is resistant to ozone, oxygen and weathering.
•  Refer also to the Table of Technical Guidelines for the chemical resistance properties of silicone compounds.

Cable design

Ignition cable 16 kV, blue
Conductor : tinned Cu conductor, flexible
Construction of conductor : according to VDE 0295 Class 5 and IEC 228 Class 5
Insulation : of silicone, compound type 2GI1 according to VDE 0207 part 20
Wrapping : glass fibre braid with optimum surface coverage
Sheath : sheath material of silicone, compound type 2GM1 according to VDE 0207 part 21,blue

High-voltage ignition cable 15 kV, and 20 kV oxbrown-red
Conductor : tinned Cu conductor, 19 x 0.25 mm
Insulation : of silicone, compound type 2GI1 according to VDE 0207 part 20, oxbrown-red

Cable for fluorescent tubes 4 kV and 7.5 kV, yellow
Conductor : tinned Cu conductor, flexible
Construction of : according to VDE 0295 Class 5 and IEC conductor 228 Class 5
Insulation : of silicone, compound type 2GI1 according to VDE 0207 part 20, yellow

Ignition cable 16 kV, blue
Rated voltage U o : 16 kV
Test voltage : 20 kV

High-voltage ignition cable 15 kV, and 20 kV oxbrown-red
Test voltage for 5 mm- Ø : 15 kV
for 7 mm- Ø : 20 kV

Cable for fluorescent tubes 4 kV and 7.5 kV, yellow
Rated voltage U o : 4 kV and 7.5 kV respectively
Test voltage AC, 50 Hz             : 2500 V          
Minimum bending radius            : 7.5 x cable diameter
Temperature range
            Mobile : - 25 °C to + 180 °C
            Fixed : -60 °C to + 180 °C
            short period : + 250 °C
Radiation resistance : 20 Mrad (20 x 10⁶ cJ/kg)
Testing: according to DIN VDE 0472 and IEC regulations
            Flame test : test class B according to VDE 0472 part 804 and IEC 332-1 and IEC 332-3
            Insulation retention : according to VDE 0472 part 814 and IEC 331