Characteristic features

•  The reduced dimension means that these flat flexible cables are space-saving compared to round flexible cables.
•  Considerably smaller bending radius than for round flexible cables.
•  Multiple bundling of flat flexible cables possible.
•  A uniform loop is formed in the axial direction such that no excess lay-up or twisting of the cores can occur.

Note

•  Free-hanging lengths of 35 m or traversing speed of 1.6 m/s should not be exceeded for the above-mentioned machinery.
•  The cables must be rolled up and suspended such that no twisting or kinks occur.
•  The cables should be freely suspended, secured at one end, in the lift shaft for several days before being installed.
•  There should be no sharp edges in the lift shaft behind the moved cables such as supports between front and rear side of multiple-lift shafts which could damage the cables.

Durability

•  Chemical resistance properties of PVC refer also to the Table of Technical Guidelines.

Cable design

Construction designed according to VDE 0281 part 403 and part 404
Conductor : plain Cu wires, flexible
Construction of conductor: according to VDE 0295 Class 5 and IEC 228 Class 5, refer also to the Table of Technical Guidelines
Insulation : core insulation of PVC, compound typeT12 according to VDE 0207 part 4
Core Identification: according to VDE 0293, single colour up to 5 cores, black cores with sequential numbering imprint in white for 6 or more cores
Protective earth conductor: green-yellow
Core configuration : cores parallel and adjacent
Sheath *) : sheath material of PVC, compound type TM2 according to VDE 0207 part 5
Sheath wall thickness: according to table 3, columns 8 to 10 in VDE 0281 part 403 and part 404
Sheath colour : black as the preferred colour

*) Single layer sheath


Note

Other core configurations and cross sections manufactured upon request.

Conductor resistance at 20 °C : according to VDE 0295
                                                   Class 5 and IEC 228
                                                   Class 5 for flexible
                                                   conductor, refer also to the Table of Technical Guidelines
Temp. At the conductor max.     : + 70 °C in operation
                                                   : + 150 °C in the event of a short circuit
Insulation resistance min. : 20 M Ω .km at 20 °C
Rated voltage
            H05VVH6 Uo /U : 300/500 V
            H07VVH6 Uo /U : 450/750 V
Test voltage AC, 50 Hz
            H05VVH6 : 2500 V
            H07VVH6 : 3000 V
Breakdown voltage min. : 6000 V
Bending radius : 10 x cable thickness
Temperature range
            Mobile : - 5 °C to + 70 °C
            Fixed : -40 °C to + 70 °C
Radiation resistance : 80 Mrad (80 x 10⁶ cJ/kg)
Testing: according to DIN VDE 0472 and IEC regulations
Flame test : test class B according to VDE 0472 part 804 IEC 332-1
PVC characteristics : self-extinguishing and flame-retardant

Other core configurations and cross sections manufactured upon request.