Characteristic features

•  Additional protection against mechanical loads.
•  Temperature-resistant from - 60 °C to + 180 °C, for short periods to + 25 0 °C, flexible at low temperatures down to - 25 °C in continuous operation.
•  These cables are approved to supply temperature class H up to 180 °C.
•  In the event of fire, no fire support; retention of the insulation and low smoke emission.

Durability

•  The silicone compound is resistant to ozone, oxygen and weathering.
•  Refer also to the Table of Technical Guidelines for other chemical resistance properties of silicone compounds.

Cable design

Construction designed on the basis of VDE 0250 part 1 and part 816
Conductor : tinned Cu wires, flexible
Construction of : according to VDE 0295 Class 5 and conductor IEC 228 Class 5
Insulation : core insulation of silicone rubber, compound type 2GI1 according to VDE 0207 part 20
Core Identification: colour coded or black with imprinted numbers according to VDE 0293
Protective earth : without green-yellow protective earth
conductor conductor for 2 cores, with green-yellow
protective earth conductor for 3 or more cores
Type of lay-up : concentric lay-up of cores in layers
Sheath : sheath material of silicone rubber, compound type 2GM1 according to VDE 0207 part 21, oxbrown-red colour
Wrapping : of glass fibre tape as protective wrapping
Braid (P) : of galvanised steel wires of optimum coverage

Note
Other core configurations, cross sections and special notch-resistant cable constructions, or resistant to temperatures up to + 250 °C for continuous operation, low-voltage cables for halogen lamps and SiY versions

Conductor resistance at 20 °C : according to VDE 0295 Class 5 and IEC 228 Class 5, refer also to the Table of Technical Guidelines
Insulation resistance min. : 20 M. Ω .km at 20 °C
Temp. At the conductor max. : + 180 °C in operation
                                      max. : + 200 °C in the event of a short circuit
Rated voltage Uo /U : 300/500 V
Test voltage AC, 50 Hz : 2000 V
Breakdown voltage min. : 20 kV/mm at 20 °C
Minimum bending radius : 7.5 x cable diameter
Temperature range
Mobile : - 25 °C to + 180 °C
Fixed : -60 °C to + 180 °C
Radiation resistance : 20 Mrad (20 x 10⁶ cJ/kg)
Testing: according to DIN VDE 0472 and IEC regulations
Flame test : test class B and test class C according to VDE 0472 part 804 IEC 332-1 and IEC 332-3
Insulation retention : according to VDE 0472 part 814 and IEC 331