Characteristic features

•  The optimised design and construction of these data transmission cables ensures compatibility with the well-known ABB control systems DECONTIC^® and PROCONTIC^®.
•  Used in particular in the field of industrial electronics and power and lighting engineering.
•  Special PVC-insulation and sheath compounds guarantee first-class mechanical properties and high flexibility of the cable.
•  0.5 mm² : suitable for Teumi-Point wiring due to the 7-strand wire construction.

Durability

The PVC sheath is largely resistant to oils (depending on the type of oil), excluding VDE 0472 part 803.
Chemical resistance for PVC refer also to the Table of Technical Guidelines.
Recommended for electromagnetic compatibility

Cable design

Construction designed on the basis of VDE 0815 conductor :plain Cu wires, 7-strand
Construction of the conductor: 0.5 mm² : 7 x 0.3 mm
                                                 1.0 mm² : 7 x 0.43 mm
Insulation : core insulation of special PVC Compound
According to VDE 0207 part 4
Pair : 2 cores twisted to a pair , pitch lengths for pairs ? 50 mm for 0.5 mm²
Core identification: colour coded according to VDE 0815
Pair identification : pair 1 blue/red           pair 3 green/brown
                              pair 2 grey/yellow     pair 4 white/black
Bundle : each bundle laid up with 4 pairs open spirals with imprinted numbers assigned to the bundles Type of lay-up : basic bundles laid up in layers
Screen (St) : static screen of plastic coated metal foil, metal side on the inside and 1 Cu drain
                     wire (0.5 mm² = 7 x 0.3 mm) under the metal foil, tinned
Sheath : sheath material of special PVC compound
Sheath colour : grey, blue also available (RAL 5015) **)
Sheath wall : according to VDE 0815 for interior Thickness installation * )

•  Note
* ) for underground installation applications, the colour is black with a reinforced PVC outer sheath (Yv), wall thickness according to VDE 0816, or alternatively with an additional sheath of wall thickness 1.0 mm (YY) available upon request.

**) With blue sheath for intrinsically safe systems available upon request.

•  Note
Other core configurations and special constructions, including halogen-free versions, manufactured upon request.

Identification of cores and pairs

Identification of the insulation of the cores by different colours which are repeated in the same sequence in each bundle.

Identification of pairs

The pairs are identified by the basic colours of the insulation.

Basic colours for pairs

Pair no.	Basic color
		a-core and	b-core
Pair 1		blue	red
Pair 2		grey	yellow
Pair 3		green	brown
Pair 4		white	black

Bundle : 4 pairs laid up to a bundle
Bundle identification : each bundle is identified by one open support spiral with imprinted numbers.
Method of counting : commencing at the inner layer with no.1 and counting successively outwards through all layers in the same manner.